Sintered diamond assortment, ceramics, 6 shapes, fine grit
Product number:
323371
Packaging Unit:
1
From Stock
| Article name: | Sintered diamond cutter assortment |
|---|---|
| Brand: | Edenta |
| Content: | 6.00 |
| Dimensions height mm up to: | 10.00 |
| Grain size: | fine |
| Unit content: | piece |
Manufacturer Informations
Name: Rudolf Flume Technik GmbH
Street: Hachestr. 66
City: 45127 Essen
Country: DE
Email: info@flume.de
Phone: 0049-201-18990
Product information "Sintered diamond assortment, ceramics, 6 shapes, fine grit"
Assortment with carbide-bonded sintered diamonds for optimised processing of ceramics and others.
Unlike galvanic grinders that are only coated with a diamond layer, sintered diamonds consist of diamonds through and through, which are held by a special metal compound.
- Ceramics assortment
- 6 types, fine grit
- Fine grit in carbide-bond ensures smooth grinding
- This results in little rework and low risk of damaging the ceramic surface
- Chalice shapes retain a permanently sharp edge, which is ideally suited for fissures and structural design.
Benefits of sintered diamond grinders:
- Longer tool life - high edge stability
- Even grinding result
- Low heat generation
- Vibration-free work
Technical specifications:
- Recommended speed for all non-ferrous metals and ceramics - always work without pressure - max. 25,000 RPM
- To maintain the grinding performance, sintered diamond should be regularly stripped with the cleaning stone, SKU 301294.
The set contains 6 types:
- Length 2mm, dia. 3.1 mm
- Length 3mm, dia. 2.0 mm, (SKU 322323)
- Length 4mm, dia. 1.8 mm
- Length 8mm, dia. 3.7 mm, (SKU 323360)
- Length 10mm, dia. 3.7 mm (pointed, SKU 323359)
- Length 10mm, dia. 3.7 mm
Unlike galvanic grinders that are only coated with a diamond layer, sintered diamonds consist of diamonds through and through, which are held by a special metal compound.
- Ceramics assortment
- 6 types, fine grit
- Fine grit in carbide-bond ensures smooth grinding
- This results in little rework and low risk of damaging the ceramic surface
- Chalice shapes retain a permanently sharp edge, which is ideally suited for fissures and structural design.
Benefits of sintered diamond grinders:
- Longer tool life - high edge stability
- Even grinding result
- Low heat generation
- Vibration-free work
Technical specifications:
- Recommended speed for all non-ferrous metals and ceramics - always work without pressure - max. 25,000 RPM
- To maintain the grinding performance, sintered diamond should be regularly stripped with the cleaning stone, SKU 301294.
The set contains 6 types:
- Length 2mm, dia. 3.1 mm
- Length 3mm, dia. 2.0 mm, (SKU 322323)
- Length 4mm, dia. 1.8 mm
- Length 8mm, dia. 3.7 mm, (SKU 323360)
- Length 10mm, dia. 3.7 mm (pointed, SKU 323359)
- Length 10mm, dia. 3.7 mm
Login
Skip product gallery
Accessoires (optional)
Cleaning stone for sintered diamond
Artikel-Nr.: 301294
A sintered diamond requires care from time to time. The sintered diamond should therefore be stripped regularly with the cleaning stone 301294. This creates a consistently clean, sharp cutting surface. For optimum results, the cleaning stone must be used wet. Before use, the block should be placed in water until no more bubbles rise. The humidity of the block prevents the formation of dust and consistently and significantly improves the cleaning effect.