Go to homepage
Skip image gallery

Wilaplat MFD digital

Product number: 316714
Packaging Unit: 1
No longer available
Article name: Galvanisiergerät Wilaplat MFD digital
Dimensions height mm: 184.00
Dimensions width mm: 250.00
External dimension length: 234.00
Gross weight grams: 7140.00
Volt/Hz: 230 / 50

Product information "Wilaplat MFD digital"

Gleichrichter ohne Wannen. Dieses modulare System ermöglicht durch die beliebig aneinander koppelbaren Wannenteile eine universelle Anzahl von Wannen. (für 1,5 Liter und 3,0 Liter Wannengröße)

• Standardfunktionen:
• digitale 4‐stellige LED‐Anzeigen zur Anzeige der Ist‐ und
Sollwerte des Ausgangsstroms und der Ausgangsspannung
• elektronische Sollwertpotentiometer zur exakten Voreinstellung
des gewünschten Prozessstroms bzw. der
gewünschten Prozessspannung
• LEDs zur Anzeige der Betriebsart (Strom‐, Spannungsregelung,
Menübetrieb)
• elektronischer Amperezähler mit Abschaltfunktion oder
Alarmmeldung
– Subtrahierender Vorwahlzähler oder addierender Gesamtzähler der als
Ampere‐sekunden‐ (As), Ampere‐minuten‐ (Amin.) bzw. Ampere‐stunden‐(Ah)‐
Zähler oder werksseitig auch als Gewichtszähler kalibriert werden kann.
– Abschaltfunktion des Gleichrichter‐gerätes bei Erreichen eines vorgegebenen
Sollwertes vorhanden
– Alarmmeldung über Relaisausgang und/oder Bus möglich

•Zeitwerke
– Subtrahierender Prozesstimer oder addierender Timer zur Bestimmung der
effektiven Prozesszeit während einer Arbeitswoche
– Einstellung der Prozesszeit in Sekunden, Minuten, Stunden
– Abschaltfunktion des Gleichrichter‐gerätes bei Erreichen eines vorgegebenen
Sollwertes vorhanden
– Alarmmeldung über Relaisausgang und/oder Bus möglich
•Rampengenerator
– Zeitabhängiger rampenförmiger Hochlauf von Ausgangsstrom oder ‐spannung
von 0 auf den vorein‐gestellten Zielwert (Sollwert). Die Zeitdauer ist durch den
Bediener einstellbar (0‐600 Sekunden).
• Optionale Funktionen
– V‐Pilot ‐ Elektronische Spannungs‐ oder Stromüberwachung
– Pulsfunktion
– Umpolfunktion

Technische Daten:
Gleichrichter:
Netzspannung: 230 V ± 10%, 47‐63 Hz
Nenngleichspannung: 10 V DC
Nenngleichstrom 10 A DC
Welligkeit. < 1 % bezogen auf den
Nennwert
Nenngleichstrom. stufenlos verstellbar
Regeltoleranz. +/‐ 1% bezogen auf den
Nennwert
Umgebungstemperatur. 0 ... 35 °C
Maße und Gewichte:
Gleichrichter: B / T / H = 234 / 250 / 174
mm
+ 10mm Füße
Gewicht: ca. 6 kg

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Skip product gallery

Accessoires (required)

PPH tray with cover Wieland
PPH tray with cover Wieland
Artikel-Nr.: 4590058
Temperature-resistant up to 80 °C. Capacity 1.5 litres.
PPH tray with cover Wieland
PPH tray with cover Wieland
Artikel-Nr.: 4590059
Temperature-resistant up to 80 °C. Capacity: 3 litres
Immersion tank WT 1 B Wilaplat
Immersion tank WT 1 B Wilaplat
Artikel-Nr.: 4590078
With integrated goods and anode rod and plastic cover. Fits one 3-litre tray or two 1.5-litre trays. With goods movement.
Immersion tank WT 3 HRB Wilaplat
Immersion tank WT 3 HRB Wilaplat
Artikel-Nr.: 4590079
With integrated goods and anode rod and plastic cover. Fits two 3-litre trays or four 1.5-litre trays. With goods movement. With electronic heating control 0 - 85 °C and dry run protection. Connection for quartz immersion heater 4 590 056 (option)
Skip product gallery

Accessoires (optional)

Stainless steel V2A anode with hanger Wieland
Stainless steel V2A anode with hanger Wieland
Article name: Stainless steel V2A anode
Artikel-Nr.: 4590020
For degreasing and colour gilding baths.
Titanium anode with hanger, platinum-plated Wieland
Titanium anode with hanger, platinum-plated Wieland
Article name: Titanium anode
Artikel-Nr.: 4590021
For rhodium plating, adhesion gold plating, gold plating, as well as all acidic precious metal baths.
Pure silver anode with hanger, Wieland
Pure silver anode with hanger, Wieland
Article name: Fine silver anode
Artikel-Nr.: 4590023
For matt and gloss silver baths.
Nickel anode with hanger, Wieland
Nickel anode with hanger, Wieland
Article name: Nickel anode
Artikel-Nr.: 4590024
For nickel baths.
Copper anode with hanger, Wieland
Copper anode with hanger, Wieland
Article name: Copper anode
Artikel-Nr.: 4590025
For cyanide copper baths.
Copper wire Wieland
Copper wire Wieland
Artikel-Nr.: 4590026
For hook for article hangers. Content: 50 pieces.
Quartz immersion heater with temperature sensor Wieland
Quartz immersion heater with temperature sensor Wieland
Artikel-Nr.: 4590056
With connection for the tray part WT 1 HRB
Article hanger for rings and small parts
Article hanger for rings and small parts
Artikel-Nr.: 4590064
With 12 hooks.
Article hanger for chains.
Article hanger for chains.
Artikel-Nr.: 4590065
With 12 hooks.
Electroplating kit
Electroplating kit
Artikel-Nr.: 4591052
With self-tensioning cross forceps and electrode pen. The convenient alligator clip facilitates connection to a rectifier.
Electrolytic degreasing ZFM, 50 g preparation salt Wieland
Electrolytic degreasing ZFM, 50 g preparation salt Wieland
Artikel-Nr.: 4637001
Preparation salt, cyanide, 50 g per litre. For all articles for degreasing before electroplating treatment. Application: Anodes - stainless steel Tray - glass/PPH Goods movement - no Temperature - 15-30 °C Voltage - 6-8 V Time - 30-60 sec.
Hard gloss gilding pale yellow Wieland
Hard gloss gilding pale yellow Wieland
Colour: Pale yellow 14 ct.
Artikel-Nr.: 4637002
Preparation salt with 1 g fine gold per litre, contains cyanide. To create decorative, thin but hard colour gilding on all non-ferrous and precious metal alloys. Content: 30 g. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Hard gloss gilding reddish Wieland
Hard gloss gilding reddish Wieland
Colour: reddish
Artikel-Nr.: 4637003
Preparation salt with 1 g fine gold per litre, contains cyanide. To create decorative, thin but hard colour gilding on all non-ferrous and precious metal alloys. Content: 30 g. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Electrolytic degreasing ZFM, 1000 g Wieland
Electrolytic degreasing ZFM, 1000 g Wieland
Artikel-Nr.: 4637004
Preparation salt, cyanide, 50 g per litre. For all articles for degreasing before electroplating treatment. Application: Anodes - stainless steel Tray - glass/PPH Goods movement - no Temperature - 15-30 °C Voltage - 6-8 V Time - 30-60 sec.
Hard gloss gilding fine gold colour Wieland
Hard gloss gilding fine gold colour Wieland
Colour: Fine gold colour
Artikel-Nr.: 4637007
Preparation salt with 1 g fine gold per litre, contains cyanide. To create decorative, thin but hard colour gilding on all non-ferrous and precious metal alloys. Content: 30 g. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Hard gloss gilding rose Wieland
Hard gloss gilding rose Wieland
Colour: rose
Artikel-Nr.: 4637009
Preparation salt with 1 g fine gold per litre, contains cyanide. To create decorative, thin but hard colour gilding on all non-ferrous and precious metal alloys. Content: 30 g. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Hard gloss gilding yellow Wieland
Hard gloss gilding yellow Wieland
Colour: Yellow 18 ct.
Artikel-Nr.: 4637013
Preparation salt with 1 g fine gold per litre, contains cyanide. To create decorative, thin but hard colour gilding on all non-ferrous and precious metal alloys. Content: 30 g. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Gloss gold plating bath 750 SC Wieland
Gloss gold plating bath 750 SC Wieland
Artikel-Nr.: 4637014
(Ready to use) with 4 g fine gold per litre. Contains cyanide. Colour: yellow 20 ct. Acidic gold plating path for creating strong gold plating on non-ferrous metals and silver alloys. Subsequently, gold in colour of your choice. Application: Anodes - titanium Tray - Glass/PPH Goods movement - yes Temperature - 20-30 °C Voltage - 2.8-3.5 V Time - 10-45 sec.
Gold bonding bath AC 3, strongly acidic Wieland
Gold bonding bath AC 3, strongly acidic Wieland
Artikel-Nr.: 4637015
(Ready to use) with 3 g of fine gold per litre. The gold bonding bath AC3 is distinguished by firmly adhering, hard, and tarnish resistant gold bonding. The bath is suited for stainless steels in addition to the conventionally galvanisable materials. Application: Anodes - titanium Tray - Glass/PPH Goods movement - yes Temperature - 20-30 °C Voltage - 3-4 V Time - 10-25 min.
Savor colour gilding bath yellow 14 ct. Wieland
Savor colour gilding bath yellow 14 ct. Wieland
Colour: Pale yellow 14 ct.
Artikel-Nr.: 4637022
With 1 g of fine gold. Contents: 100 ml concentrate for one litre. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Savor colour gilding bath yellow 18 ct. Wieland
Savor colour gilding bath yellow 18 ct. Wieland
Colour: Yellow 18 ct.
Artikel-Nr.: 4637023
With 1 g of fine gold. Contents: 100 ml concentrate for one litre. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Savor colour gilding bath rose Wieland
Savor colour gilding bath rose Wieland
Colour: rose
Artikel-Nr.: 4637025
With 1 g of fine gold. Contents: 100 ml concentrate for one litre. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Savor colour gilding bath red Wieland
Savor colour gilding bath red Wieland
Colour: red
Artikel-Nr.: 4637026
With 1 g of fine gold. Contents: 100 ml concentrate for one litre. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Savor colour gilding bath fine gold colour Wieland
Savor colour gilding bath fine gold colour Wieland
Colour: Fine gold colour
Artikel-Nr.: 4637027
With 1 g of fine gold. Contents: 100 ml concentrate for one litre. Application: Anodes - stainless steel Tray - PPH Goods movement - no Temperature - 50-60 °C Voltage - 6-8 V Time - 20-30 sec.
Gloss nickel bath WN 1 Wieland
Gloss nickel bath WN 1 Wieland
Artikel-Nr.: 4637051
(Ready to use). High-performance bath with levelling effect, good throwing power and excellent gloss creation. Application: Anodes - nickel Tray - PPH Goods movement - yes Temperature - 40-60 °C Voltage - 1.8-4.0 V
Copper bath Wieland
Copper bath Wieland
Artikel-Nr.: 4637061
(Ready to use). Contains cyanide. For pre-treatment of non-precious metals. Forms a base layer for electroplating. Especially for use in the pretreatment of non-precious metals, such as iron, tin, and zinc alloys. Application: Anodes - copper Tray - Glass/PPH Goods movement - yes Temperature - 18-25 °C Voltage - 1.5-3.0 V Time - 5-15 min.
Silver gloss bath Wieland
Silver gloss bath Wieland
Artikel-Nr.: 4637071
(Ready to use). With 30 g of fine silver per litre. Contains cyanide. Achieves high-gloss silver layers. Application: Anodes - fine silver Tray - Glass/PPH Goods movement - yes Temperature - 20-30 °C Voltage - 0.5-1.0 V Time - 5-50 min.
Black rhodium bath Wieland
Black rhodium bath Wieland
Artikel-Nr.: 4637087
Concentrate with 2 g of rhodium per litre. The products achieve dark, anthracite rhodium plating and are extremely resistant to abrasion. Application: Anodes - titanium Tray - Glass/PPH Goods movement - yes Temperature - 18-25 °C Voltage - 1.8-2.2 V Time - 2-7 min.
Rhodium gloss bath high white Wieland
Rhodium gloss bath high white Wieland
Artikel-Nr.: 4637088
Concentrate with 2 g of rhodium per litre. This bath produces a brilliant, high white colour and is highly abrasion resistant. Application: Anodes - titanium Tray - Glass/PPH Goods movement - yes Temperature - 20-25 °C Voltage - 1.8-2.2 V Time - 2-5 minutes
Protective lacquer red Wieland
Protective lacquer red Wieland
Artikel-Nr.: 4637101
For covering all soft stones with hardness of less than 7, such as coral, pearl, lapizlazuli, turquoise. The paint can be carefully removed with acetone.
Concealer felt pen, red Wieland
Concealer felt pen, red Wieland
Artikel-Nr.: 4637105
To specifically cover small areas, Covering lacquer can be removed later with alcohol. Felt tip insert individual 4 637 106.
Conductive silver paint Wieland
Conductive silver paint Wieland
Artikel-Nr.: 4640211
Ready to use, for pre-treating non-metallic materials before copper-plating. Can also be used for bridging electrical conductor lines.
This website uses cookies to ensure the best experience possible. More information...