-
Tools/supplies
-
Drilling, polishing, grinding
-
Turning
-
Facilities, compressed air and vacuum
-
Goldsmith special tools/GRS
-
Small tools
- Soldering, melting, casting, welding
-
Measuring and testing
-
Surface treatment
-
Clean, dry, turning, sawing
-
CAD-software / software
-
Watchmaker tools
-
Sales and workshop tools
-
3D Werkzeuge & Reinigung
-
Drilling, polishing, grinding
BESTSELLER: Precision Welder PUK 6 inclusice welding microscope SM6
Product number:
362784
Packaging Unit:
1
the delivery time is approx. 2 more weeks.
| Article name: | Precision Welder |
|---|---|
| Brand: | Lampert |
| Gross weight grams: | 12000.00 |
| Magnification: | 10x |
| Manufacturer name: | PUK 6 with microscope SM6 |
| Volt/Hz: | 230 / 50 |
Manufacturer Informations
Name: Lampert Werktechnik GmbH
Street: Ettlebener Str. 27
City: 97440 Werneck
Country: DE
Email: mail@lampert.info
Phone: 09722-9459-0
Product information "Precision Welder PUK 6 inclusice welding microscope SM6"
The new PUK 6 - fine welding technology that sets standards.
The comparison with its predecessors shows: 20 years of experience and passion in development raise fine welding technology to an unprecedented level with the PUK 6.
WELDING
• Up to 3.3 welds per second: up to 65 % faster weld spot sequence
• More homogeneous, smoother weld spots - Excellent weld seam even with variable weld spot spacing
• Higher heat input if required: Perfect results even with critical materials
• 50 % finer weld spots in the lower power spectrum
• Minimum pulse duration now down to 0.1 ms: 67 % shorter welding time in micro mode
HANDPIECE AND ELECTRODES
• 20 % faster and therefore more agile electrode stroke
• Maximum electrode thickness now up to 1 mm
• Up to 50 % longer electrode life*
OPERATION
• 70 % higher display resolution with increased viewing angle under all ambient conditions
• Faster operation and material selection through direct control with a central control element
• New standby mode: Continuous availability with 85 % lower energy consumption
WELDING MICROSCOPE SM6
• New elegant design
• Perfectly matched to the PUK 6
• Height and tilt adjustment for optimum working comfort and ergonomic working position
• Padded hand rests for comfortable working
• LED illumination on the microscope head, adjustable in 4 brightness levels, optimum illumination of the working area
• High precision at 10x magnification (optional 15x)
• Electronically controlled LCD eye protection module
• Can also be used as a fully-fledged viewing microscope
Scope of delivery:
PUK 6 fine welding unit with handpiece, welding microscope SM6, gas hose 3m, mains cable, contact clamp, diamond grinding wheel, 4x electrodes 0.8mm WLa, 2x electrodes 1.0mm WLa.
The comparison with its predecessors shows: 20 years of experience and passion in development raise fine welding technology to an unprecedented level with the PUK 6.
WELDING
• Up to 3.3 welds per second: up to 65 % faster weld spot sequence
• More homogeneous, smoother weld spots - Excellent weld seam even with variable weld spot spacing
• Higher heat input if required: Perfect results even with critical materials
• 50 % finer weld spots in the lower power spectrum
• Minimum pulse duration now down to 0.1 ms: 67 % shorter welding time in micro mode
HANDPIECE AND ELECTRODES
• 20 % faster and therefore more agile electrode stroke
• Maximum electrode thickness now up to 1 mm
• Up to 50 % longer electrode life*
OPERATION
• 70 % higher display resolution with increased viewing angle under all ambient conditions
• Faster operation and material selection through direct control with a central control element
• New standby mode: Continuous availability with 85 % lower energy consumption
WELDING MICROSCOPE SM6
• New elegant design
• Perfectly matched to the PUK 6
• Height and tilt adjustment for optimum working comfort and ergonomic working position
• Padded hand rests for comfortable working
• LED illumination on the microscope head, adjustable in 4 brightness levels, optimum illumination of the working area
• High precision at 10x magnification (optional 15x)
• Electronically controlled LCD eye protection module
• Can also be used as a fully-fledged viewing microscope
Scope of delivery:
PUK 6 fine welding unit with handpiece, welding microscope SM6, gas hose 3m, mains cable, contact clamp, diamond grinding wheel, 4x electrodes 0.8mm WLa, 2x electrodes 1.0mm WLa.
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
No reviews found. Share your insights with others.
Skip product gallery
Argon 4.6
Artikel-Nr.: 315691
Accessoires (required)
Argon 4.6 with C10 cylinder Welding gas according to EN ISO 14175 for welding process WIG/MIG Composition: Ar. 99.996% (technical quality) Special characteristics: - Quiet and stable arc - High process safety - No burn-off of alloying constituents - Universally usable Attention: Delivery only ex works! (For delivery to German islands, an island surcharge applies) Pick-up at Flume Technik in Essen is not possible!
Skip product gallery
Welding wire 750/-Gg PUK
Artikel-Nr.: 211991
Welding wire 585/-Gg PUK
Artikel-Nr.: 211992
Welding wire 750/-WG PUK
Artikel-Nr.: 211993
Welding wire 960/-Pt PUK
Artikel-Nr.: 211994
Welding wire 925/- PUK
Artikel-Nr.: 211995
Welding wire fine titanium PUK
Artikel-Nr.: 211996
Welding wire stainless steel PUK
Artikel-Nr.: 211997
T-connector for shutter connection for PUK optical unit + microscope
Artikel-Nr.: 212020
Welding wire palladium PUK
Artikel-Nr.: 217602
Footswitch for PUK 3s and PUK 4
Artikel-Nr.: 232283
Welding fume absorber for PUK 4
Artikel-Nr.: 248576
Flexible contact tape
Artikel-Nr.: 305827
Raw cable
Artikel-Nr.: 305828
Tack welding set + footswitch for PUK 4.1
Artikel-Nr.: 314345
Argon 4.6 filling
Artikel-Nr.: 315692
Electrodes Spezial Ø 0,5 mm for PUK 10 pieces without diamond grinding wheel
Artikel-Nr.: 346431
Electrodes Spezial Ø 0,6 mm for PUK 10 pieces without diamond grinding wheel
Artikel-Nr.: 346432
Electrodes Spezial Ø 0,8 mm for PUK 10 pieces without diamond grinding wheel
Artikel-Nr.: 346433
Optical unit with tripod PUK
Artikel-Nr.: 4580560
Special electrodes, dia. 0.6 mm, for PUK
Artikel-Nr.: 4580901
Accessoires (optional)
Dimensions Ø mm:
0.25
|
Material:
750/- Gelbgold
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.25
|
Material:
585/- Gelbgold
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.20
|
Material:
750/- Weißgold
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.25
|
Material:
960/- Platin
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.35
|
Material:
Silber 970
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.30
|
Material:
Fine titanium
Welding wire on coil for spot welding.
Dimensions Ø mm:
0.40
|
Material:
Stainless steel
Welding wire on coil for spot welding.
T-connector for shutter connection for PUK optical unit + microscope
Dimensions Ø mm:
0.40
|
Material:
Palladium
Welding wire on coil for spot welding.
For each selected waveform and device setting, the welding process can alternatively be triggered with the optional footswitch. This can make difficult workpiece geometries easier. Users familiar with laser, can trigger welding "as usual".
Accessories for "frequent welders" sucks off fumes and dusts generated during welding and neutralises it by means of an activated carbon filter. The absorber is automatically controlled by the welding device so that suction operates only during the welding process.
In spot welding, maintaining contact with workpieces is sometimes problematic. Tools can be combined safely with this contact band to achieve good electrical conductivity between the workpiece and the welding device.
In spot welding, maintaining contact with workpieces is sometimes problematic. Tools can be combined safely with this contact band to achieve good electrical conductivity between the workpiece and the welding device.
Using the tack welding set, loose parts can be quickly and easily fixed at a desired position in order to fully weld them in the next step. The tack welding function thus is an aid for easy positioning, but not for final welding. Preferred materials for this function are stainless steel and titanium.
Argon 4.6 Filling with C10 cylinder (in exchange for empty cylinder), including pick up from the customer (The empty C10 bottle must be packed in a suitable box) Welding gas according to EN ISO 14175 for welding process WIG/MIG Composition: Ar. 99.996% (technical quality) Special characteristics: - Quiet and stable arc - High process safety - No burn-off of alloying constituents - Universally usable Attention: Delivery only ex works! (For delivery to German islands, an island surcharge applies) Refilling at Flume Technik in Essen is not possible! Please refer to the exchange cylinder overview for a listing of all cylinders that can be refilled.
Article name:
Electrodes Spezial without diamond grinding wheel
|
Special feature:
10 pieces 0,5 mm
Unser „Klassiker“ für das PUK-Schweissen – die Wolframelektrode „WLa“Diese Elektroden „WLa“ haben sich für das PUK-Schweißen bewährt und zeichnen sich zusätzlich durch ein gutes Preis-Leistungs-Verhältnis aus.Die Elektroden sind sehr universell einsetzbar und eignen sich sehr gut für Schweißungen von un- und hochlegierten Stählen, Aluminium-, Titan-, Nickel-, Kupfer-, Zinn- und Edelmetalllegierungen.Die Elektroden „WLa“ sind in drei verschiedenen Durchmessern* verfügbar:Ø 0,5 mm x 50 mmDas bewährte Maß für Alltagsaufgaben in der Schmuckfertigung.Insbesondere für kleine und mittlere Schweißleistung geeignet.Tüte mit 10 Elektroden ohne Diamantscheibe.
Article name:
Electrodes Spezial without diamond grinding wheel
|
Special feature:
10 pieces 0,6 mm
Unser „Klassiker“ für das PUK-Schweissen – die Wolframelektrode „WLa“Diese Elektroden „WLa“ haben sich für das PUK-Schweißen bewährt und zeichnen sich zusätzlich durch ein gutes Preis-Leistungs-Verhältnis aus.Die Elektroden sind sehr universell einsetzbar und eignen sich sehr gut für Schweißungen von un- und hochlegierten Stählen, Aluminium-, Titan-, Nickel-, Kupfer-, Zinn- und Edelmetalllegierungen.Die Elektroden „WLa“ sind in drei verschiedenen Durchmessern* verfügbar:Ø 0,6 mm x 50 mmUniversell einsetzbar für feine Arbeiten wie auch für Schweißungen mit höherer Leistung. Tüte mit 10 Elektroden ohne Diamantscheibe. (Abbildung ähnlich)
Article name:
Electrodes Spezial without diamond grinding wheel
|
Special feature:
10 pieces 0,8 mm
Unser „Klassiker“ für das PUK-Schweissen – die Wolframelektrode „WLa“Diese Elektroden „WLa“ haben sich für das PUK-Schweißen bewährt und zeichnen sich zusätzlich durch ein gutes Preis-Leistungs-Verhältnis aus.Die Elektroden sind sehr universell einsetzbar und eignen sich sehr gut für Schweißungen von un- und hochlegierten Stählen, Aluminium-, Titan-, Nickel-, Kupfer-, Zinn- und Edelmetalllegierungen.Die Elektroden „WLa“ sind in drei verschiedenen Durchmessern* verfügbar:Ø 0,8 mm x 50 mmBesonders geeignet für Schweißungen mit hoher Leistung.Geringster Elektrodenwiderstand daher größte Leistungsübertragung.(Für die Größe 0,8 mm wird eine passende Spannzange (Flume-Artikel-Nummer 314006) benötigtTüte mit 10 Elektroden ohne Diamantscheibe. (Abbildung ähnlich)
Alternative for use of the included microscope. With connection to the PUK control unit via the control line on the unit for automatic darkening of the visual field during the ignition of the arc. Large visual field with 3 diopters magnification. Eye protection filter made of real glass. Glare-free magnifier. 230 V / 9 Watt Includes: - tripod arm for welding handpiece
Article name:
Special electrodes
|
Special feature:
10 pieces 0,6 mm
Content: 10 pieces and 1 diamond grinding wheel 4891622