-
Tools/supplies
-
Drilling, polishing, grinding
-
Turning
-
Facilities, compressed air and vacuum
-
Goldsmith special tools/GRS
-
Small tools
-
Soldering, melting, casting, welding
-
Pickling
-
Casting
-
Soldering
-
Soldering equipment
-
Accessories/spare parts
- Soldering and melting burner
-
Gas saving equipment
-
Blow torches
-
Soft soldering (Tin)
-
Soldering vapour absorber
-
Soldering bolt/soldering aid
-
Holding tools for soldering
-
Soldering materials
-
Chemicals for the hard solder
-
Chemicals for soft soldering
-
Gas installation
-
Soldering equipment
-
Solder and materials
-
Melt
-
Welding
-
Vulcanizing
-
Grow
-
Pickling
-
Measuring and testing
-
Surface treatment
-
Clean, dry, turning, sawing
-
CAD-software / software
-
Watchmaker tools
-
Sales and workshop tools
-
Drilling, polishing, grinding
Solder blow pipe, head dia. 7mm
Product number:
4580655
Packaging Unit:
1
From Stock
Application: | propane |
---|---|
Article name: | Solder blow pipe |
Dimensions height mm: | 20 |
Dimensions width mm: | 45 |
External dimension length: | 210 |
Gross weight grams: | 115 |
Head Ø mm: | 7 |
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Accessoires (required)
For all blowpipes with dia. 6.3 mm. DIN and DVGW certified.
Dimensions Ø mm up to:
13.00
Hose clamp for hose OD 11-13 mm
Safety device that automatically closes the gas outlet if the nominal flow rate specified for an operating pressure is exceeded by more than 10%, e.g., in case of hose rupture or loosening of the connected tubing. For intended use and to comply with the warranty conditions, the included installation and operating instructions must be observed. 1/4" left-hand thread.
Low pressure regulator with overpressure protection, pressure gauge, and grommet with 1/4" left-hand thread, up to 50 mbar, blowpipe 4580655 and 4580649.
To be used as air tube for 4580655, 4580654, and 4580649.
Accessoires (optional)
With 2 outlets, 1/4" thread, individually closable, and connection with union nut 1/4". For blowpipes.
With union nut. 1/4" left-hand thread, for hose ID 6 mm, for pressure reducer 4581087.
Product information "Solder blow pipe, head dia. 7mm"
For propane up to 50 mbar. The most widely used blowpipe for goldsmiths. The flame size is adjusted by a plug valve on the gas supply.