-
Tools/supplies
-
Drilling, polishing, grinding
-
Turning
-
Facilities, compressed air and vacuum
-
Goldsmith special tools/GRS
-
Suction
-
Dressing and punches
-
From Hauer
-
Bending machines
-
One diving matrices
- Barrel tools/GRS
-
GRS article
-
Metal separator
-
Hallmarking
-
Bolt
-
Ring width change
-
Hinge bracket
-
Forging and upsetting
-
Rollers
-
Works Board accessories
-
Pull
-
Accessories for stones and pearls
-
Suction
-
Small tools
-
Soldering, melting, casting, welding
-
Measuring and testing
-
Surface treatment
-
Clean, dry, turning, sawing
-
CAD-software / software
-
Watchmaker tools
-
Sales and workshop tools
-
3D Werkzeuge & Reinigung
-
Drilling, polishing, grinding
GRS handpiece QC Magnum Palm with 6 graver holder inserts
Product number:
249733
Packaging Unit:
1
From Stock
| Article name: | QC Magnum Palm |
|---|---|
| Brand: | GRS |
| Catalogue item No.: | 004-940 |
| Gross weight grams: | 299.00 |
Manufacturer Informations
Name: Rudolf Flume Technik GmbH
Street: Hachestr. 66
City: 45127 Essen
Country: DE
Email: info@flume.de
Phone: 0049-201-18990
Product information "GRS handpiece QC Magnum Palm with 6 graver holder inserts"
Hardly any other engraving handpiece comes close to the application range of Magnum. Despite its compact dimensions, it provides more power than previous handpieces with double the length. It can be accurately controlled and offers excellent nuance options. For Airtact. Incl. 6 GRS graver holder inserts.
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
No reviews found. Share your insights with others.
Skip product gallery
GRS QC toolholder for graver handle, flat, content: 3 pieces
Artikel-Nr.: 234410
GRS QC toolholder, traditional, extra long, 10 pieces
Artikel-Nr.: 235981
GRS QC toolholder for graver handle, flat, content: 10 pieces
Artikel-Nr.: 235984
GRS QC toolholder blank, contents 1 pc.
Artikel-Nr.: 304608
GRS QC toolholder for graver handle, flat, content: 1 pieces
Artikel-Nr.: 304612
GRS QC toolholder for shaft dia. 2.34, content: 10 pieces
Artikel-Nr.: 305878
GRS QC toolholder for shaft dia. 2.34, content: 3 pieces
Artikel-Nr.: 306867
GRS QC toolholder for shaft dia. 2.34, content: 1 piece
Artikel-Nr.: 310974
Accessoires (required)
For traditional QC gravers with flat handle. Drilled hole 3.4 mm.
Extra long QC toolholder. Extends tools by 12.7 mm. 10-pack
For traditional QC gravers with flat handle. Drilled hole 3.4 mm.
With centre hole. Blank for you to customise for special tools
For traditional QC gravers with flat handle. Drilled hole 3.4 mm.
GRS QC toolholder for shaft dia. 2.34, content: 10 pieces
GRS QC toolholder for shaft dia. 2.34, content: 3 pieces
GRS QC toolholder for shaft dia. 2.34, content: 1 piece
Skip product gallery
GRS graver holder inserts set with dampers, Contents: 3 pcs
Artikel-Nr.: 308194
Graphite dry powder
Artikel-Nr.: 308670
GRS handpiece top part Airtact Magnum, stainless steel
Artikel-Nr.: 310755
Accessoires (optional)
Change the impact strength of GRS handpieces by simply inserting a tool or graver into this new QC toolholder with damper. The special plastic cap attached at the end of the QC toolholder ensures that the force is transmitted from the handpiece to the tool more gently, softening the impact. Fine engravings and shades are easier to control, stress on the tool and hand vibrations are reduced. The difference is small, but pleasant for fine work. The QC toolholder with damper is compatible only with the GRS handpieces Monarch, 901, or Magnum. Contents 3 pcs
Recommended for all compressed air-powered GRS hand pieces. Reduces friction without oily residues.
These kits are equipped with a special Airtact-compatible knob, replacing the standard handpiece knob. A special rubber pad for the heel of the hand "senses" the required force and thus enables the Airtact to adjust the power automatically. One knob each with rubber pad, type E #6, #8, #10 (#044-944) and three rubber pads type D #1 are included.