The Bergeon universal screw press made of anodized aluminum is ideal for setting watch glasses and pressed case backs. Of course, SWISS MADE in proven Bergeon quality and compatible with many Bergeon inserts. Benefits: • Made of anodized aluminum with non-slip base • Linear spindle with anti-rotation • Spoked handwheel Ø 100 mm • Spindle and insert holder with M6 thread • Working height for watches up to 45 mm high • Compatible with many Bergeon inserts • Optionally further insert holders available (our references 219209 (height 5mm) or 219210 (height 28mm) Scope of delivery: • Screw press • M6 mounting adapter with a height of 21mm (also available individually under reference 203243)

Very handy, practical watch winder in Swiss Made quality from Bergeon • Housing made of anodized aluminum • Different modes: "Stop", "Left-hand winding" and "Right-hand winding" • Start the rotation by pressing the crown or by gently pulling the ring • Battery: Nimh LR03 (AAA) • Run time: 120 minutes of battery life when fully charged • Direct friction release • Universal elastomer coupling • 150 rpm idle speed • Maximum torque of 40 mNm • Delivery in a black box with: - 2x rechargeable batteries and mini USB charger + power supply unit - 1x stainless steel watchmaker's screwdriver Ø 2.00 Bergeon no. 30081-200 (our reference 354578) - 1x interchangeable tip with standard eraser Bergeon no. 31408-E

Tool with height adjustment for easy and precise loosening and fastening of the ligament screws. Two TorkSpeed screwdrivers with slip-on drums provide the necessary power transmission. Watches with metal straps can be put on without loosening the clasp. Stable thanks to the non-slip underside. Scope of delivery: - Bergeon assembly tool - 2x TorkSpeed screwdrivers 1.40mm - 1x aluminum drum

Improved feel, new design. Enables a practical and easy conversion of standard leather bracelets to accommodate interchangeable spring bars. Length about 150mm Size of the notch approx. 1 x 5mm Material: anodized aluminum, rustproof, stamp made of hardened steel SWISS MADE Special pliers for punching out the leather lugs suitable for interchangeable spring bars. Easy handling and no slipping thanks to guide bolts. Swiss Made.

Premium tool from Switzerland • With 1 round punch / pin with a Ø of 2.00mm for round holes • Lever made of anodized aluminum, module made of steel • Stainless steel mandrel, hardened 57-58 HRC Optionally available as an accessory • 1 round punch / pin with a diameter of 1.20 mm - our reference 360248 • 1 rectangular stamp 2.10 x 1.60 mm - our reference 360249 • Delivery in a case with additional space for different sized punches • Swiss Made quality from BERGEON

Bergeon combination device in Swiss Made quality • To open pressed case backs and to remove the bezels • Compact and stable device for precise and uncomplicated work without the risk of damage • Made of anodized aluminum with non-slip rubber feet • Height-adjustable work table for precise setting of the working height • Adjustable vice • Various blades made of 57HRC hardened and highly polished steel with angles of 20 ° and 25 ° available

Plastic rings, hardness 98 shores Contents: Ø 38, 42 and 46 mm

This pin driving stand allows you to drive bracelet pins in and out without the use of hammers in a very easy way. The band support table adjusts height to fit a variety of sizes of band. Easy to use operation, just place the band in the support and line the link pin with the pusher pin. Use the outside screw to apply pressure and push the pin out of the band. This design reduces the chance of damage being done by taking out the margin of human error and hand held pin pusher and hammer have. Supplied with 5 pins: 1x 27 mm / Ø 0.80 mm 1x 33 mm / Ø 0.80 mm 1x 27 mm / Ø 1.00 mm 1x 33 mm / Ø 1.00 mm 1x 20 mm / Ø 2.50 mm - Stability of tool make it easy to use - Easy height adjustment for different band thicknesses - Includes 8 tips; 2 each of 0.80mm and 1.00mm in long and short length - Fits band approximately 40mm wide - Extra pins stored in base - Rubber feet for skid free surface - Swiss made

Plastic case with 15 tools for changing and shortening straps Contains: • 15 special tools • 1 x spring bar tool, reference 337770 (pin 0.8 and small shovel) • 1 x dressing forceps, Bergeon-No. 7026-00, form 00, length 120mm • 1 x screwdriver made of stainless steel, reference 317575 - Ø 1.60mm • 1 x screwdriver made of stainless steel, reference 317572 - Ø 1.00mm • 1 x thorn holding brooch, reference 4229049 • 1 x assortment of pens, Bergeon-No. 7745-GS (0.40mm to 2.0mm) • 1 x stand for pen remover, reference 4229065 • 1 x flexible soft rubber magnifying glass • 1 x hammer with plastic tips (conical / flat), length 215mm • 1 x flat-nose pliers with cut, length 130mm, reference 4430905 • 1 x blade-shaped insert for spring bar tool, reference 4229006 • 1 x mandrel insert 0.8mm for spring bar tool, reference 4229005 • 1 x replacement blade for screwdriver, Ø 1.60mm • 1 x replacement blade for screwdriver, Ø 1.00mm